78' Quick Attach Mega Mower X Brush Cutter SF
18-25 GPM

Description:

Direct Drive
10' Cutting Capacity
Replaceable Mulching Teeth

Clear and mulch the heaviest brush, grass, and trees with the Mega Mower X Industrial Open Front Brush Cutter. This design levels forests and overgrowth, allowing you to reclaim what once was. The industrial deck is reinforced for maximum cutting potential and long-term durability. Open deck design and heavy-duty push bar make quick work of large saplings and small trees.
Industry first, patent pending, serrated sides plates allow for limbing of overhanging branches
12 carbide tipped thumbnail teeth line the bottom to stir material and aid in the grinding of stumps
1/4” side plates run the entire length of the mower and tie directly into the push bar and tubular supports
2” x 4” 3/16” thick grade 50 steel tubes support the deck, are tied directly into the side plates, and are twice as strong as C-channel used in most brush mowers
Blade retention uses castle style nuts with a pin to retain them from loosening during operation as safety is our number one concern
Fully forged bearing carrier shaft to hold up to gyroscopic forces mower’s endure in rugged conditions and terrain
3/4” single piece flywheel with rounded corners made from 50,000 psi minimum yield strength steel with additional 1/2” reinforcement
Long, angled skid shoes are designed specifically for mulching material into finer pieces by putting the nose down to let the high speed blades mulch material
5” AR400 steel axe blades are abrasion resistant to mulch material close to the ground without wearing out quickly

Specifications:
Model
78' Standard Flow

Part Number 901591
Operating Weight 1,470 lb.
Overall Height 27'
Overall Length 83.5'
Overall Width 82'
Blade Carrier Thickness 3/4' Grade 50 Steel
Cutting Width 78'
Number of Blades (4) 1/2' AR400 17.5' Long
Number of Carbides 12
Flow Range 18-25 GPM (Standard Flow)
Maximum PSI 4,500
Blade System Mass 378 lbs.
Tip Speed 14,800 ft/min @ 25 GPM
Wire Catchers Yes
Bearing Carrier Weight 75 lbs.
Output Bearing Size 2.875'
Blade System Energy 79,363 ft/lbs @ 25 GPM
Energy Stored in Blades 32%
Case Drain

At JNJ we Sell Equipment & Attachments. We also do Monthly & Long-Term Rentals on heavy equipment.
We are currently offering an option to purchase your rental. If you rent a machine for 1 month and decide to purchase it within the first month, 100% of the rental fee will go towards purchase of the machine.

(Please note some exclusions do apply, call for more details.)

Looking for skid steer attachments? We have BRUSH MOWERS, Forks, Buckets and MANY OTHER ATTACHMENTS available for purchase!!! Call us and we will let you know what we have. Requests for special order QUICK ATTACH Attachments are welcome!
Looking for a certain type or special piece of equipment. Give us a call and we would be happy to help you find what you need!
For Rentals - Please call to see our availability and current rates! If you are considering renting before purchasing, we can discuss a % of the first few months’ rental going towards the purchase price of the machine. Please call for more details.
(You must have $1 Million Liability Business Insurance for Renting.)

We also have Financing available!

Call Mari or Joe to set up a time to come out or with any questions!
You can also find us at:
-Facebook- JNJMontana

-Google- JNJ Contracting and Machinery Sales Inc. Helena, MT

*ALL TAXES BY GOVERNING AGENCIES ARE BUYERS’ RESPONSIBILITY.